(800) 860-9608
 

Mag Drills /
Portable Magnetic Drills


JANCY MAG DRILLS

M-Tech offers Jancy portable magnetic drills that use the patented Slugger cutters to get the job done quickly and accurately.  These mag drills are high-quality products and offer the most popular features such as:

  • Positive slug ejection system ensures slug will not remain in after the cut

  • Impulse switch turns motor off if excessive movement is detected, protecting operator and machine

  • Double-insulated dual-coil magnet

  • Precision-machined cast-aluminum frame

  • Safety strap and chip shield included

Additional Features by Model
Model JM101 USA5000 MAG FORCE 4x4
Features
  • Internal lubrication of cutters increases tool life

  • Roller bearing assembly supports arbor system, increasing performance while reducing wear

  • Powerful motor with cast-aluminum housing.

  • Self-lubricating Teflon® motor slide ways

  • Optional steel pinion shaft for left- or right-hand operation

  • Carry case included

  • Heavy duty 1400 watt double insulated motor with 2-speed gear box and cast aluminum housing

  • Arbor support bracket fitted with precision bearing and external grease zirt

  • The only drilling machine available today with the coolant reservoir placed safely within the machine frame

  • Double-insulated operator control panel reverses for left- or right-handed convenience

  • Solid steel one-piece feed handle shaft reverses for left- or right- handed operator

  • One piece motor and slide assembly for increased spindle support and stability

  • Ultra compact 11" working height (without coolant bottle).

  • Adjustable cutter guard with built in chip breaker.

  • Through spindle coolant system with removable reservoir.

  • Permanent quill system requires no adjustments.

  • Stationary motor.
    Lightweight—only 27 pounds.

  • Smart magnet circuitry.

  • Positive slug ejecting arbor system.

  • 3/4" drive twist drill set available.

  • 4 speed gear box
  • 4" diameter through 3" material
  • External coolant system
  • 1-1/4" twist drill capacity
  • Ships with #3 morse taper arbor part #05MT800S
  Jancy Portable Magnetic Drill Model JM101 Jancy Portable Magnetic Drill Model USA5 Jancy Portable Magnetic Drill Model MAG FORCE Jancy Portable Magnetic Drill Model 4x4
Specifications by Model
Model JM101 USA5 MAG FORCE 4x4
Height 16-1/4" 23-3/4" 12" 31-1/2"
Width 7-1/2" (with handles) 7-1/2" 6-1/2" 9-1/2"
Length 9-3/8" 11" 11-1/2" 16"
Weight 28 lbs. 51 lbs. 27 lbs. 58 lbs.
Drill Motor 120V, single-phase,
50/60 Hz
1.8HP 120V single-phase,
50/60 Hz
1.6HP 1200W single-phase
120V/10.2A ~ 240V/5.1A
120V or 240V single-phase,
50/60 Hz
No load speed 450 RPM 250 RPM / 560 RPM 395 100-150 RPM / 200-310 RPM
Drill point breakaway 650 lbs on 1" plate. 950 lbs on 1" plate. 1096 lbs. on 1" plate 1934 lbs. on 1" plate
Magnet Base 3" x 6-1/4" 4" x 7-11/16" 4" x 6-1/2" 4-3/4" x 9-1/2"
Magnet dead lift 1480 lbs. on 1" plate 2320 lbs. on 1" plate 1810 lbs. on 1" plate 4833 lbs. on 1" plate
Arbor Bore 3/4" 3/4" 3/4" 3/4"
Spindle Taper n/a n/a n/a #3 Morse Taper
Slugger Cutter Diameter (max.)* 1-3/8" diameter 2-3/8" diameter 1-3/8" 4"
Slugger Depth Of Cut 2" 3" 2" 3"
Twist Drill Capacity 1/8" to 1/2" 3/16" to 3/4" n/a n/a
With Chuck and Adapter** 3" stroke
5" chuck face to material
(** #70598)
3-7/8" stoke
6" chuck face to material
(** #10235-3/4)
n/a n/a
C/L Pilot to Motor Face 1-1/4" 1.625" n/a n/a

* Note: Magnetic base requires 1" minimum material thickness when drilling holes larger than 2-1/16" diameter.


EVOLUTION MAG DRILLS

M-Tech offers Evolution portable magnetic drills that use Evolution Cyclone Cutters, guaranteed to outperform annular cutters made out of HSS, Cobalt, or Tini Coated cutters.  These mag drills are high-quality products.
 

  Evolution Mag Drill - BEAR 300 Evolution Mag Drill - COUGAR 200 Evolution Mag Drill - MUSTANG 130 Evolution Mag Drill - AUTO FOX 120
Model BEAR 300 COUGAR 200 MUSTANG 130 AUTO FOX 120
Weight 20" 20" 15" 17"
Height 54 lbs. 48 lbs. 26 lbs. 38 lbs.
Annular Cutter Range 7/16" - 3" 7/16" - 2-1/16" 7/16" - 1-1/2" 7/16" - 1-1/4"
Twist Drill Capacity 1-1/4" 5/8" 1/2" n/a
Depth of Cut 2" 3" 2" 2"
Magnetic Holding Deadlift 5,000 lbs. 3,500 lbs. 2,200 lbs. 3,500 lbs.
Magnet Footprint 8" x 4" 8" x 3" 6-1/2" x 3" 8" x 3"
Speeds
(no load)
4-speed reversible gearbox (210,270,410,530 RPM) 2 speed (380/500 RPM) 550 RPM 550 RPM
Power 110V 1800W 110V 1800W 110V 1200W 110V 1200W

Call us toll-free at 800-860-9608
Home  Tubing & Pipe Benders  Notchers & Copers  Miter Cut Band Saws  Cold Saws  Metal Cutting Circular Saws and Chop Saws  Scotchman Iron Workers  Ring Rollers & Angle Rolls  Mag Drills  Slugger Cutters  Sheet Metal Shears  Plate Rolls & Slip Rolls  Sheet Metal Brakes  Abrasives  Tube Cleaners & Tube Polishing Machines  Contact Us

Website Copyright � M-Tech Sales, Inc. - All rights reserved