(800) 860-9608
 

Jancy Slugger® Cutters

Perfect companions to our Mag Drills, Jancy Slugger® Cutters save time and reduce cost.  With their unique center-free design, Slugger® cutters cut only the outer periphery of the hole, ejecting the remaining center as a slug.  Regardless of diameter, Slugger® cutters produce reamed quality burr-free holes in one operation, eliminating costly pilot holes and step drilling.  Holes on curved surfaces and interrupted cuts are easily produced without distortion.  Torque and horsepower requirements are even reduced by Slugger® cutters.

Click here to see video!

Compare Slugger® cutters to twist drills

Cuts holes faster Improves hole finish Produced solid slug Leaves a burr-free hole Cuts more holes between sharpening Cuts on curved surfaces Performs with lighter equipment Allows overlap cuts on existing holes Requires no step-drilling or pilot holes Drill a 1" hole through 1" steel in 25 seconds!!!

Slugger® cutters are available in 1", 2", 3", 4", and 6" depths in a wide variety of diameters:

1" and 2" Depth of Cut Slugger® cutters

• English standard diameters every ¹/₁₆" from ⁷/₁₆" to 2-³/₈"
• Metric diameters every 1mm from 13mm to 52mm
• Tap Sizes ²⁹/₆₄," ³¹/₆₄, ³³/₆₄, ¹⁷/₃₂, ³⁵/₆₄, ³⁷/₆₄, ²¹/₃₂, ⁴⁹/₆₄ and ²⁵/₃₂
• Cobalt available in diameters ¹/₂, ⁹/₁₆, ⁵/₈, ³/₄, ²¹/₃₂ and ²⁵/₃₂

3" Depth of Cut Slugger® cutters

• English standard diameters every ¹/₁₆" from ³/₄" to 2-³/₈"
• Metric diameters every 1mm from 20mm to 52mm
• Tap Sizes ⁴⁹/₆₄ and ²⁵/₃₂
• Cobalt available in ²⁵/₃₂ diameter

4"and 6" Depth of Cut Slugger® cutters

• English standard diameters every ¹/₁₆" from ¹³/₁₆" to 2-¹/₁₆"
• Metric sizes every 1mm from 21mm to 51mm