(800) 860-9608
 

Mandrel Tube Benders
Pipe Benders & Tubing Benders

If you're looking for smaller Manual and Programmable tube benders or pipe benders, click here.


Baileigh Industrial's model MB-350 Mandrel Exhaust Bender is a superior quality bender, offering absolutely the finest bends when tight radius bends are required.  Internal mandrels support the material during the entire bending process, leaving a smooth bend from start to finish.  The MB-350 can be used on many different materials and a wide range of tube and pipe sizes.

  • 3" O.D. Stainless Steel Capacity
  • Programmable with up to 140 programs and 10 bends per program
  • Quick Change Tooling
  • Bend as tight as 1.5 times O.D. Center Line Radius
 

Baileigh Industrial MB-350 Mandrel Exhaust Bender

Closeup of MB-350 Mandrel Exhaust Bender
Closeup of MB-350 Mandrel Exhaust Bender
Round Mild Steel: 3"OD x .125" wall
Round Aluminum: 3"OD x .188" wall
Round Stainless: 3"OD x .065" wall
Square Mild Steel: 2"x2" x .188" wall
Solid Bar Mild Steel: 1.181" O.D.
Maximum Bend Radius: 12" CLD
Maximum Angle: 190
Maximum Length over Mandrel: 10"
Bending Speed (DOB): 18 degrees per second
Accuracy of DOB: +/- 0.50
Weight: 2100 lbs.
Power: 220V, 60Hz, 3 Phase

$38,500.00, including table with mandrel extractor.  (Tooling additional.)
 Call us and mention web site for special pricing!


When you need an exceptional bend quality, tight radius, or both, these machines from Hines Bending Systems offer superior quality finished products.  From manual to fully automated CNC controlled units, with capacity from 1-1/2" all the way to 8" o.d., M-Tech has the products to fit your needs.  Finance programs are available on all of the models below.

 Standard Features Of All Six HR/NC models

  • Drop-away clamp die holder

  • Pressure die holder

  • Wiper die holder

  • Foot pedal operation

  • Mandrel rod included

  • Mandrel extractor

  • Clockwise rotation

  • 2,000 psi operating pressure

  • 190 degrees maximum bend angle

  • +/- 0.01 degree bend angle accuracy

  • 220V / 3-phase / 60 Hz

  100 HR 200 HR 200 NC 300 NC 600 NC 800 NC

Click on a model's picture to view a larger image:

Model 100 HR Model 200HR Model 200 NC Model 300 NC Model 600 NC Sorry.
No picture
Avalible
Comparison of Additional Standard Features
Overhead Tie Bar    
Turret Style Bend Settings (6 bends)        
Pressure Die Assist    
Pressure Die Assist Rear Support Roller    
Mandrel Lubricator    
Mandrel Early Out Programmable    
PLC Controller (CKE) Type SH-32R1    
Touch Screen (Proface America)    
Specifications
Center Line Height (bend die) 25mm 52mm 52mm 70mm 90mm 130mm
Standard Maximum Radius 5 inch 12 inch 12 inch 18 inch 24 inch 32 inch
Maximum Tube Length Over Mandrel 5 feet 5.25 feet 8.5 feet 10 feet 12 feet 15 feet
Bending Arm Speed 8.0 RPM 3.5 RPM 5.0 RPM 3.5 RPM 2.2 RPM 1.0 RPM Max.
Motor 7 HP 10 HP 15 HP 20 HP 30 HP 30 HP
Reservoir Capacity 55 U.S. Gal. 55 U.S. Gal. 120 U.S. Gal. 125 U.S. Gal. 165 U.S. Gal. 165 U.S. Gal.
Approximate Weight 4,400 lbs. 6,000 lbs. 7,000 lbs. 13,800 lbs. 18,000 lbs. 20,000 lbs.
Approximate Dimensions (L x W x H) 8.6' x 3' x 3.5'" 8.6' x 3' x 3.5'" 12.5' x 4' x 3.5' 15' x 5' x 3.7' 18' x 5' x 4' 20' x 5' x 4.3'
Capacity
Round Tube 1.312" o.d.
0.133" wall
2.4" o.d.
0.190" wall
3.0" o.d.
0.109" wall
4.0" o.d.
0.125" wall
6.0" o.d.
0.250" wall
8.0" o.d.
0.250" wall
Round Pipe 1" pipe
0.133" wall
2" pipe
0.190" wall
2" pipe
0.220" wall
3.5" pipe
0.220" wall
4.5" pipe
0.337" wall
6" pipe
0.432" wall

 Top Of Page


 Standard Features of All Six CNC Models

  • Drop-away clamp die holder

  • Pressure die holder

  • Wiper die holder

  • Pressure die assist

  • Mandrel lubricator

  • Mandrel extractor

  • Panasonic server motors

  • Clockwise rotation

  • 190 degrees maximum bend angle

  • +/- 0.01 degree bend angle accuracy

  100 CNC 150 CNC 250 CNC 300 CNC 600 CNC 800 CNC
Comparison of Additional Standard Features

Overhead Tie Bar

   
Specifications
Maximum Feeding 165 ft./min. 165 ft./min. 132 ft./min. 120 ft./min. 40 ft./min. 25 ft./min.
Maximum POB 40 rad/min. 40 rad/min. 30 rad/min. 30 rad/min. 10 rad/min. 3 RPM
Standard Maximum Radius 5 inch 8 inch 12 inch 16 inch 18 inch 32 inch
Maximum Tube Length Over Mandrel 5 feet 6 feet 8.25 feet 10 feet 10 feet 15 feet
Bending Arm Speed 25.0 RPM 20.0 RPM 10.0 RPM 8.0 RPM 1.5 RPM 1.0 RPM
Motor 4.0 HP 5.25 HP 20 HP 20 HP 30 HP 40 HP
Electrical 220V / 3-phase 220V / 3-phase 220V / 3-phase 220V / 440V / 3-phase 220V / 440V / 3-phase 220V / 440V / 3-phase
Operating Pressure 700 psi. 1,000 psi. 2,000 psi. 2,000 psi. 2,000 psi. 2,000 psi.
Reservoir Capacity 55 U.S. Gal. 80 U.S. Gal. 120 U.S. Gal. 125 U.S. Gal. 165 U.S. Gal. 205 U.S. Gal.
Approximate Weight 3,000 lbs. 5,000 lbs. 7,000 lbs. 14,000 lbs. 18,000 lbs. 22,000 lbs.
Capacity
Round Tube 1.305" o.d.
0.133" wall
1.9" o.d.
0.160" wall
3.0" o.d.
0.203" wall
4.0" o.d.
0.125" wall
6.0" o.d.
0.250" wall
8.0" o.d.
0.250" wall

 Top Of Page


Call us toll-free at 800-860-9608
Home  Tubing & Pipe Benders  Notchers & Copers  Miter Cut Band Saws  Cold Saws  Metal Cutting Circular Saws and Chop Saws  Scotchman Iron Workers  Ring Rollers & Angle Rolls  Mag Drills  Slugger Cutters  Sheet Metal Shears  Plate Rolls & Slip Rolls  Sheet Metal Brakes  Abrasives  Tube Cleaners & Tube Polishing Machines  Contact Us

Website Copyright � M-Tech Sales, Inc. - All rights reserved